Skip to main content
Version: Streamsheets 2.4

Installation

Eclipse Mosquitto, Eclipse Streamsheets and the Cedalo Management Center are all available for Windows, Linux and macOS. In addition it also can be installed on a Raspberry Pi.

Installation

The easiest way to install any of Cedalos products and connected Eclipse project software individually, as a bundle or the whole platform is to use the official Docker based installer image cedalo/installer, which is available at Docker Hub.

The installer will guide you through the installation process and will allow you to select which components you want to install: Eclipse Mosquitto, Eclipse Streamsheets, the Management Center or combinations of it.

The following sections describe how to do the Docker based installation on Windows, Linux and macOS.

Windows

This section describes how to install Eclipse Mosquitto, Eclipse Streamsheets and the Management Center under Windows.

Step 1: Install Docker

If you have not yet, install Docker for Windows (see installation instructions here).

Step 2: Use the installer

For an installation under Windows use the installer image tagged with 2-win:

docker run -it -v C:\cedalo_platform:/cedalo cedalo/installer:2-win

In the following dialog you can select (using the space bar) which components should be installed:

? Select what to install › - Space to select. Return to submit
◉ Management Center for Eclipse Mosquitto
◉ Eclipse Streamsheets
◉ Eclipse Mosquitto 2.0
◯ Eclipse Mosquitto 1.6

When you have selected the components to install, press the return key, which will start the installation process. During the installation process the following files will be created within the installation directory:

C:\cedalo_platform
├── docker-compose.yml # Docker Compose file
├── mosquitto #
│ ├── config # Configurations for Mosquitto
│ ├── data # Data directory for Mosquitto
├── start.bat # Start script
├── stop.bat # Stop script
├── streamsheets #
│ ├── init.json # Configuration for Streamsheets
├── update.bat # Update script

Step 3: Start everything

To start everything you installed, just use the start.bat file.

cd C:\cedalo_platform
start.bat
info

If this is the first time you start the applications, Docker will first perform several downloads (i.e., Docker images) that are required for the application to run.

caution

Please do not close the terminal, in which you executed the start command. If you close the terminal, the applications will be stopped.

Step 4: Open the applications

When everything is installed and started correctly the applications should be available under the following URLs:

  • Eclipse Mosquitto: mqtt://localhost:1883

  • Eclipse Streamsheets Web UI: http://localhost:8081

    Default Credentials: User: adminPassword: 1234. Change your password in the administration menu.

  • Management Center Web UI: http://localhost:8088

    Default Credentials: User: cedalo Password: mmcisawesome. Change the password in the docker-compose.yml file. Find and change this entry:

CEDALO_MC_USERNAME: cedalo
CEDALO_MC_PASSWORD: mmcisawesome

Linux

This section describes how to install Eclipse Mosquitto, Eclipse Streamsheets and the Management Center under Linux.

Step 1: Install Docker

If you have not yet, install Docker for your Linux platform (see installation instructions here). For example, Docker is available for Centos, Debian, Fedora or Ubuntu.

Step 2: Use the installer

For an installation under Linux use the installer image tagged with 2-linux:

docker run -it -v ~/cedalo_platform:/cedalo cedalo/installer:2-linux

In the following dialog you can select (using the space bar) which components should be installed:

? Select what to install › - Space to select. Return to submit
◉ Management Center for Eclipse Mosquitto
◉ Eclipse Streamsheets
◉ Eclipse Mosquitto 2.0
◯ Eclipse Mosquitto 1.6

When you have selected the components to install, press the return key, which will start the installation process. During the installation process the following files will be created within the installation directory:

~/cedalo_platform
├── docker-compose.yml # Docker Compose file
├── mosquitto #
│ ├── config # Configurations for Mosquitto
│ ├── data # Data directory for Mosquitto
├── start.sh # Start script
├── stop.sh # Stop script
├── streamsheets #
│ ├── init.json # Configuration for Streamsheets
├── update.sh # Update script

Step 3: Start everything

To start everything you installed, just use the start.sh file.

cd ~/cedalo_platform
sh start.sh
info

If this is the first time you start the applications, Docker will first perform several downloads (i.e., Docker images) that are required for the application to run.

caution

Please do not close the terminal, in which you executed the start command. If you close the terminal, the applications will be stopped.

Step 4: Open the applications

When everything is installed and started correctly the applications should be available under the following URLs:

  • Eclipse Mosquitto: mqtt://localhost:1883

  • Eclipse Streamsheets Web UI: http://localhost:8081

    Default Credentials: User: adminPassword: 1234. Change your password in the administration menu.

  • Management Center Web UI: http://localhost:8088

    Default Credentials: User: cedalo Password: mmcisawesome. Change the password in the docker-compose.yml file. Find and change this entry:

CEDALO_MC_USERNAME: cedalo
CEDALO_MC_PASSWORD: mmcisawesome

macOS

This section describes how to install Eclipse Mosquitto, Eclipse Streamsheets and the Management Center under macOS.

Step 1: Install Docker

If you have not yet, install Docker for macOS (see installation instructions here).

Step 2: Use the installer

For an installation under macOS use the installer image tagged with 2-macos:

docker run -it -v ~/cedalo_platform:/cedalo cedalo/installer:2-macos

In the following dialog you can select (using the space bar) which components should be installed:

? Select what to install › - Space to select. Return to submit
◉ Management Center for Eclipse Mosquitto
◉ Eclipse Streamsheets
◉ Eclipse Mosquitto 2.0
◯ Eclipse Mosquitto 1.6

When you have selected the components to install, press the return key, which will start the installation process. During the installation process the following files will be created within the installation directory:

~/cedalo_platform
├── docker-compose.yml # Docker Compose file
├── mosquitto #
│ ├── config # Configurations for Mosquitto
│ ├── data # Data directory for Mosquitto
├── start.sh # Start script
├── stop.sh # Stop script
├── streamsheets #
│ ├── init.json # Configuration for Streamsheets
├── update.sh # Update script

Step 3: Start everything

To start everything you installed, just use the start.sh file.

cd ~/cedalo_platform
sh start.sh
info

If this is the first time you start the applications, Docker will first perform several downloads (i.e., Docker images) that are required for the application to run.

caution

Please do not close the terminal, in which you executed the start command. If you close the terminal, the applications will be stopped.

Step 4: Open the applications

When everything is installed and started correctly the applications should be available under the following URLs:

  • Eclipse Mosquitto: mqtt://localhost:1883

  • Eclipse Streamsheets Web UI: http://localhost:8081

    Default Credentials: User: adminPassword: 1234. Change your password in the administration menu.

  • Management Center Web UI: http://localhost:8088

    Default Credentials: User: cedalo Password: mmcisawesome. Change the password in the docker-compose.yml file. Find and change this entry:

CEDALO_MC_USERNAME: cedalo
CEDALO_MC_PASSWORD: mmcisawesome

Raspberry Pi

Version 2.4 of Streamsheets is not available for the raspberry pi.

Starting & Stopping

Starting Cedalo platform:

The Fast Install automatically starts the applications for the first time. To start after the Manual Install use the following commands.

Navigate into the folder “~/cedalo_platform” with your shell and enter sudo sh start.sh.

cd ~/cedalo_platform
sudo sh start.sh

Now you are able to access your applications here:

You are able to access the applications from anywhere in your network, by typing in the IP-adress/hostname of your Pi together with the port 8081. The standard Raspberry Pi hostname is “raspberrypi”, which results in:

Standard hostname adress: raspberrypi:8081; raspberrypi:8088

Open a browser on another computer in the same local network and type the address.

  • Eclipse Mosquitto: mqtt://localhost:1883

  • Eclipse Streamsheets Web UI: http://localhost:8081

    Default Credentials: User: adminPassword: 1234. Change your password in the administration menu.

  • Management Center Web UI: http://localhost:8088

    Default Credentials: User: cedalo Password: mmcisawesome. Change the password in the docker-compose.yml file. Find and change this entry:

CEDALO_MC_USERNAME: cedalo
CEDALO_MC_PASSWORD: mmcisawesome

Stopping Cedalo platform:

Navigate to your shell where the application is running and simply press ctrl + c or navigate into the folder “~/cedalo_platform” with your shell and enter sudo sh stop.sh.

cd ~/cedalo_platform
sudo sh stop.sh

Manual Installation

Step 1: Install Docker

If you have not yet, install Docker for Raspbian (see installation instructions here and here) and install Docker Compose.

Step 2: Use the installer

For an installation under Raspbian use the installer image tagged with 2-rpi:

docker run -it -v ~/cedalo_platform:/cedalo cedalo/installer:2-rpi

In the following dialog you can select (using the space bar) which components should be installed:

? Select what to install › - Space to select. Return to submit
◉ Management Center for Eclipse Mosquitto
◉ Eclipse Streamsheets
◉ Eclipse Mosquitto 2.0
◯ Eclipse Mosquitto 1.6

When you have selected the components to install, press the return key, which will start the installation process. During the installation process the following files will be created within the installation directory:

~/cedalo_platform
├── docker-compose.yml # Docker Compose file
├── mosquitto #
│ ├── config # Configurations for Mosquitto
│ ├── data # Data directory for Mosquitto
├── start.sh # Start script
├── stop.sh # Stop script
├── streamsheets #
│ ├── init.json # Configuration for Streamsheets
├── update.sh # Update script

Step 4: Open the applications

When everything is installed and started correctly the applications should be available under the following URLs:

info

If this is the first time you start the applications, Docker will first perform several downloads (i.e., Docker images) that are required for the application to run.

caution

Please do not close the terminal, in which you executed the start command. If you close the terminal, the applications will be stopped.